자꾸오류가납니다.
제CD롬은LG supermulti securdisc이거인데요...
이CD롬이굽는기능이없는걸까요?
저배속으로(16x)로구웠습니다.
근데7%까지만가고계속오류가뜸니다
재설정발생이라면서...
오류가계속발생하네요
로그를복사해보니이렇게나옵니다.
뭐때문에오류가생긴건가요?
확실한답변주시면감사하겟습니다....
NT-SPTI used
Nero Version: 7.5.7.0
Internal Version: 7, 5, 7, 0
Recorder: <HL-DT-ST DVD-RAM GSA-H58N>Version: 1.03 - HA 1 TA 0 - 7.5.7.0
Adapter driver: <IDE> HA 1
Drive buffer : 2048kB
Bus Type : default (0) -> ATAPI, detected: ?
CD-ROM: <HL-DT-ST DVD-RAM GSA-H58N>Version: 1.03 - HA 1 TA 0 - 7.5.7.0
Adapter driver: <IDE> HA 1
=== Scsi-Device-Map ===
DiskPeripheral : SAMSUNG HD250HJ atapi Port 0 ID 0 DMA: On
ArrayPeripheral : MARVELL Virtual Device 1.00 mv61xx Port 4 ID 25 DMA: Off
CdRomPeripheral : HL-DT-STDVD-RAM GSA-H58N1.03 mv61xx Port 4 ID 4 DMA: Off
=== CDRom-Device-Map ===
HL-DT-ST DVD-RAM GSA-H58N E: CDRom0
=======================
AutoRun : 1
Excluded drive IDs:
WriteBufferSize: 83886080 (0) Byte
BUFE : 0
Physical memory : 2047MB (2096356kB)
Free physical memory: 1501MB (1537136kB)
Memory in use : 26 %
Uncached PFiles: 0x0
Use Inquiry : 1
Global Bus Type: default (0)
Check supported media : Disabled (0)
5.8.2008
CD 이미지
오후 2:36:16 #1 Text 0 File SCSIPassThrough.cpp, Line 583
LockMCN - completed sucessfully for IOCTL_STORAGE_MCN_CONTROL
오후 2:36:16 #2 Text 0 File Burncd.cpp, Line 3133
HL-DT-ST DVD-RAM GSA-H58N
버퍼 언더런 방지 활성화됨
오후 2:36:16 #3 Text 0 File Burncd.cpp, Line 3435
Turn on Track-At-Once, using CD-R/RW media
오후 2:37:16 #4 Text 0 File DlgWaitCD.cpp, Line 301
Last possible write address on media: 359845 ( 79:59.70)
Last address to be written: 281441 ( 62:34.41)
오후 2:37:16 #5 Text 0 File DlgWaitCD.cpp, Line 313
Write in overburning mode: NO (enabled: CD)
오후 2:37:16 #6 Text 0 File DlgWaitCD.cpp, Line 2863
Recorder: HL-DT-ST DVD-RAM GSA-H58N;
CDR code: 00 97 26 66; OSJ entry from: CMC Magnetics Corporation
ATIP Data:
Special Info [hex] 1: D0 00 98, 2: 61 1A 42 (LI 97:26.66), 3: 4F 3B 47 (LO 79:59.71)
Additional Info [hex] 1: 00 00 80 (invalid), 2: 00 80 00 (invalid), 3: 00 00 00 (invalid)
오후 2:37:16 #7 Text 0 File DlgWaitCD.cpp, Line 485
>>> Protocol of DlgWaitCD activities: <<<
=========================================
Insert the disc to write to.
(Medium in drive: 알 수 없음. Medium required by compilation: CD-R/RW.)
오후 2:37:16 #8 Text 0 File ThreadedTransferInterface.cpp, Line 820
Setup items (after recorder preparation)
0: TRM_DATA_MODE1 (2 - CD-ROM Mode 1, 졸리엣)
2 indices, index0 (150) not provided
original disc pos #0 + 281442 (281442) = #281442/62:32.42
relocatable, disc pos for caching/writing not required/not required, patch infos
-> TRM_DATA_MODE1, 2048, config 0, wanted index0 0 blocks, length 281290 blocks [Main]
--------------------------------------------------------------
오후 2:37:16 #9 Text 0 File ThreadedTransferInterface.cpp, Line 1033
Prepare recorder [HL-DT-ST DVD-RAM GSA-H58N] for write in TAO
DAO infos:
==========
MCN: ""
TOCType: 0x00; Session Closed, disc not fixated
Tracks 1 to 1: Idx 0 Idx 1 Next Trk
1: TRM_DATA_MODE1, 2048/0x00, FilePos 0 307200 576700416, ISRC ""
DAO layout:
===========
___Start_|____Track_|_Idx_|_CtrlAdr_|_____Size_|______NWA_|_RecDep__________
-150 | lead-in | 0 | 0x41 | 0 | 0 | 0x00
-150 | 1 | 0 | 0x41 | 281442 | 281142 | 0x00
0 | 1 | 1 | 0x41 | 281442 | 281292 | 0x00
281442 | lead-out | 1 | 0x41 | 0 | 0 | 0x00
오후 2:37:16 #10 Text 0 File ThreadedTransferInterface.cpp, Line 1104
Removed 2 run-out blocks from end of track 1. Length: 281292 -> 281290.
오후 2:37:16 #11 Text 0 File SCSIPassThrough.cpp, Line 41
SPTILockVolume - completed successfully for FCTL_LOCK_VOLUME
오후 2:37:16 #12 Phase 24 File dlgbrnst.cpp, Line 1746
Caching of files started
오후 2:37:16 #13 Text 0 File Burncd.cpp, Line 4262
Cache writing successful.
오후 2:37:16 #14 Phase 25 File dlgbrnst.cpp, Line 1746
Caching of files completed
오후 2:37:16 #15 Phase 36 File dlgbrnst.cpp, Line 1746
Burn process started at 16x (2,400 KB/s)
오후 2:37:16 #16 Text 0 File ThreadedTransferInterface.cpp, Line 2730
Verifying disc position of item 0 (relocatable, no disc pos, patch infos, orig at #0): write at #0
오후 2:37:16 #17 Text 0 File MMC.cpp, Line 22124
Set BUFE: Buffer underrun protection -> ON
오후 2:37:23 #18 SPTI -1114 File SCSIPassThrough.cpp, Line 293
E: CdRom0: SCSIStatus(x02) WinError(0) NeroError(-1114)
Sense Key: 0x06 (KEY_UNIT_ATTENTION)
Sense Code: 0x29
Sense Qual: 0x00
CDB Data: 0x2A 00 00 00 00 00 00 00 20 00 00 00
Sense Area: 0x08 00 06 00 00 00 00 0E 00 00 00 00 29
Buffer x06d9da00: Len x10000
0x00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
0x00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
0x00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
오후 2:37:23 #19 CDR -1114 File Writer.cpp, Line 278
Reset occurred
E: HL-DT-ST DVD-RAM GSA-H58N
오후 2:37:23 #20 SPTI -1033 File SCSIPassThrough.cpp, Line 293
E: CdRom0: SCSIStatus(x02) WinError(0) NeroError(-1033)
Sense Key: 0x02 (KEY_NOT_READY)
Sense Code: 0x04
Sense Qual: 0x01
CDB Data: 0x35 02 00 00 00 00 00 00 00 00 00 00
Sense Area: 0x08 00 02 00 00 00 00 0E 00 00 00 00 04 01
오후 2:37:45 #21 CDR -1033 File WriterStatus.cpp, Line 191
Drive not ready
E: HL-DT-ST DVD-RAM GSA-H58N
오후 2:37:45 #22 TRANSFER -18 File WriterStatus.cpp, Line 191
Could not perform EndTrack
오후 2:37:45 #23 CDR -201 File WriterStatus.cpp, Line 194
Invalid write state
E: HL-DT-ST DVD-RAM GSA-H58N
오후 2:37:45 #24 TRANSFER -18 File WriterStatus.cpp, Line 194
Could not perform EndTrack
오후 2:37:45 #25 Text 0 File MMC.cpp, Line 16956
<HL-DT-STDVD-RAM GSA-H58N> start Close Session
오후 2:37:45 #26 SPTI -1026 File SCSIPassThrough.cpp, Line 293
E: CdRom0: SCSIStatus(x02) WinError(0) NeroError(-1026)
Sense Key: 0x05 (KEY_ILLEGAL_REQUEST)
Sense Code: 0x2C
Sense Qual: 0x04
CDB Data: 0x5B 01 02 00 00 00 00 00 00 00 00 00
Sense Area: 0x08 00 05 00 00 00 00 0E 00 00 00 00 2C 04
오후 2:37:45 #27 CDR -1026 File WriterStatus.cpp, Line 244
Current program area empty
E: HL-DT-ST DVD-RAM GSA-H58N
오후 2:37:45 #28 TRANSFER -19 File WriterStatus.cpp, Line 244
Could not perform Fixation
오후 2:37:45 #29 Text 0 File WriterStatus.cpp, Line 253
falling back to disc fixation
오후 2:37:45 #30 Phase 38 File dlgbrnst.cpp, Line 1746
Burn process failed at 16x (2,400 KB/s)
오후 2:37:45 #31 Text 0 File Cdrdrv.cpp, Line 10459
DriveLocker: UnLockVolume completed
오후 2:37:45 #32 Text 0 File SCSIPassThrough.cpp, Line 583
UnLockMCN - completed sucessfully for IOCTL_STORAGE_MCN_CONTROL
Existing drivers:
Registry Keys:
HKLM\Software\Microsoft\Windows NT\CurrentVersion\WinLogon\AllocateCDROMs : 0 (Security Option)
답변자님,
정보를 공유해 주세요.
굽는기능이 없는 기기라면 굽기 버튼 눌렀을때 이미지 파일의 이름과 위치를 지정하는 창이 나옵니다.
기능이 없는 건 아니고 제구실을 못하는 건데요.
원인은 정확히는 알기 힘들지만 기기쪽 문제일 가능성이 높습니다.
그러나 시디구우면서 다른 작업을 해서 그런 경우도 많이 있지요.
다른 컴에 붙여서 테스트하면 원인을 알아내는데 도움은 될겁니다.
그 외에는 별로 아는게 없네요.
다른 답변을 기다려보세요.
하지만 님이 답을 얻을 가능성은 높지 않습니다.
2008.08.05.
-
채택
질문자가 채택한 답변입니다.
UP이 많은 답변일수록 사용자들에게 더 많이 노출됩니다.